Vibration Fluidized Casein Desiccated Coconut Granule Drying Machine Ammonium Sulfate Fluid Bed Dryer for Salt Breadcrumbs

Basic Info

Model NO.	WKS-FBD-3*0.3
Fluid Bed Drying Equipment Type	Horizontal Fluid Bed
Condition	New
Fluid Bed Area	0.9m3
Evaporation Capacity	20-35kg/H
Motor	0.8*2kw
Transport Package	Wooden Case
Trademark	WKS
Origin	China
Production Capacity	1500pieces/Year

Product Description

FLUID BED DRYER
Working principle
WKS series of vibration fluid bed dryer is a continuous drying equipment for non-sticky particles. Its working principle is: cold air is filtered through the filter, and then goes into the heater, and is heated to a certain temperature, then hot air is distributed into the lower bed via multiple inlets and flows up through perforated plate of the bed. Material goes evenly into the bed through screw feeder, under the action of the vibration force, the material moves up forward continuously along the horizontal direction, while undergoes heat exchange with the hot air coming up from bottom, the moisture of material is evaporated rapidly, and the wet air is discharged from the exhaust fan, and the material is fully dried and discharged from the discharge port.
Features
The equipment drying time is short, only takes about 6 minutes for the whole drying process, the general effective ingredients will not be destroyed.Adjustable weir plate is set at the discharge port, by adjusting the height of the weir plate, you can control stayed drying time of the material so as to make sure that final water content of materials meets the requirements.Perforated plate adopts back pressure process to ensure flatness of perforated plate, to avoid the deadline in the process of material running.There are multiple wind inlet to the lower bed, so that the hot air through the material layer is more uniform.The whole electric heating treatment is applied to the lower bed after its completion of production, eliminating the welding gravity, improving the strength of the bed, thick-walled seamless tube is applied to the internal to strengthen the evenly vibration force.The center tube which is equipped with vibration motor is welded with reinforcement plate according to the angle of vibration radiation, effectively passing vibration force evenly to the various parts of the bed, so that the material is uniformly fluidized, while equipped with removable weight, to avoid resonance phenomenon.Shock absorber adopts quenched and tempered spring, compression performance and rebound performance are good, effectively filtering the vibration force to the ground, to overcome the defects of rubber shock absorber which is easy aging and short life, etc.The upper bed is designed to be fixed, there is a soft connection with the lower bed, reducing the load of vibration motor, while reducing the strength of the upper bed.
A cooling section is equipped with the rear part, can quickly cool the material, the material can be packaged directly; cold air undergoes dehumidification first, and then heated up, reducing the cold air humidity, to ensure that the final water content of materials to meet the requirements, and the cold air temperature can be set according to the specific requirements .The upper bed is equipped with a number of observation goggles and cleaning doors, easy to clean.The upper bed adopts a number of stainless steel seamless steel pipes to strengthen, improving the strength, while on strengthening pipes there is no accumulated material.The steam heater adopts seamless tube aluminum fins, and designed to U-shape, with external shell, so that the heating tube has room for thermal expansion and contraction, to avoid weld cracking phenomenon of the conventional heater with fixed heat pipe due to thermal expansion and contraction, while improving the heat transfer efficiency.Adopts high efficiency long cone cyclone de-dust separator, greatly reducing the exhaust dust, so that the material yield can reach 98%.
Application
Industrial vibration fluidized bed dryer applicable to chemical, pharmaceutical, food, dehydrated vegetables, food, minerals and other industries powder, granular materials, dry, cooling and other operations.
Such as: citric acid, monosodium glutamate, borax, ammonium sulfate, compound fertilizer, radish l, silk, soybean meal, lees, seeds, slag, sugar
Equipment Details
The process equipment is composed of four major parts: heating system, drying system, dust
removal system, electronic control system.
1, Heating System:
The dry air entering the equipment is clean air filtered through the primary filter which adopts non-woven fabrics, mainly to prevent the insects into the tower and filter the general dust in the air to prevent pollution. Filter is easy to disassemble, clean and check. The system uses electricity as a heat source.
2, Drying System:
Drying system is composed of hot air duct, main body, insulation layer, discharge pipe,
observation cleaning door and other major components. The heated air heated by the hot air stove
enters the fluid bed through the hot air duct, and then goes out with moisture after going through
the screen plate and heat exchange with material.
Adjust the amplitude of the vibration motor to control the material residence time.
Fluid bed is equipped with observation cleaning door, in order to facilitate the observation of dry
conditions, to meet the convenient discharge, complete process requirements.
lnsulation materials adopts ultra-fine glass wool, unilateral thickness of 50mm, good insulation
effect.
To ensure the purity of the product, stencils and the upper box are made of stainless steel SUS304
material, welded by precision polishing, smooth surface, no adsorption of material, easy to clean.
Welded by precision polishing, the surface is smooth, no bump phenomenon.
3, Dust Removal System:
The system uses a first-stage cyclone collector as a dust removal device, The cyclone collector is composed of an upper box, a lower box of the cyclone collector, and a collection tank. The collection rate of finished products reaches 90-95%.
The material is mainly discharged from the fluid bed discharge, the fine powder collected by the efficient cyclone separator, discharge is convenient, no dust.
4, Electrical Control System:
All the components of the entire electrical control cabinet are used well-known brands.
Operation buttons, digital display instruments ... are installed in the operating cabinet, easy to
operate, reasonable layout, clear and eye-catching.
5.Technical Parameters

Model	Fluid bed area(m2)	Inlet temperature (ºC)	Outlet temperature (ºC)	Evaporation capacity (kg/h)	Motor(kW)	Weight (kg)
WKS-FBD-3*0.3	0.9	70-140	40-70	20-35	0.8*2	1250
WKS-FBD-4.5*0.3	1.35	70-140	40-70	35-50	0.8*2	1250
WKS-FBD-4.5*0.45	2.025	70-140	40-70	50-70	1.1*2	1670
WKS-FBD-4.5*0.6	2.7	70-140	40-70	70-90	1.1*2	1670
WKS-FBD-6*0.45	2.7	70-140	40-70	80-100	1.5*2	2100
WKS-FBD-6*0.6	3.6	70-140	40-70	100-130	1.5*2	2400
WKS-FBD-6*0.75	4.5	70-140	40-70	120-140	2.2*2	2840
WKS-FBD-6*0.9	5.4	70-140	40-70	140-170	2.2*2	3160
WKS-FBD-7.5*0.75	5.625	70-140	40-70	150-180	2.2*2	3200
WKS-FBD-7.5*0.9	6.75	70-140	40-70	160-210	3.0*2	3600

Pictures

Company Profile
Henan Workers Machinery (hereinafter referred to as WKS), established for more than 10 years, is committed to the research, manufacturing, and sales of various industrial drying machines, fruits & vegetables, and food processing machines. We have a modern standard workshop, covering over 2,000 square meters; WKS has more than 50 professional engineers from a different technical background with many years of rich research and manufacturing experiences. All of our products are made of high-quality stainless steel with mature product design and sophisticated production technology. Therefore, high-quality products have much easier access to a good market reputation and share. Our products are exported to dozens of countries such as the United States, Canada, Britain, France, Australia, South Korea, India, Singapore, Thailand, Malaysia, Sri Lanka, Brazil, Russia, Uzbekistan, Romania, Croatia, Latvia, Sweden, Nigeria, and South Africa, etc. WKS believes in customer-oriented business and "quality first" philosophy, so WKS focuses on providing customers with high quality, competitive prices, and wholehearted services. Welcome to visit us to start the cooperation!
FAQ
1. who are we?
We are based in Henan, China, start from 2017,sell to Western Europe(20.00%),North America(20.00%),Domestic Market(8.00%),South Asia(5.00%),Southern Europe(5.00%),Northern Europe(5.00%),Central America(5.00%),South America(5.00%),Eastern Asia(5.00%),Mid East(5.00%),Oceania(5.00%),Eastern Europe(5.00%),Southeast Asia(5.00%),Africa(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Dehydrator/dryer,Pulverizer/Grinder/Mill,Mixer/Blender,Pelletizing machine/Granulator,Packaging machine

4. why should you buy from us not from other suppliers?
Over ten years extensive experience in design and production; Innovative engineers, well trained technicians; A full-time after-sales service team; Guaranteed quality with competitive prices.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian