China Spray Dryer

Basic Info

Model NO.	LPG-150
Water Evaporation	150kg/Hr
Equipment Material	SUS304
Material Collect	Cyclone, Bag Filter
Temperature	~300 Degree C
Powder Collect Rate	>=95%
Control	PLC
OEM	Provide
Transport Package	Frame Container
Specification	ID: 2.5m
Trademark	Hengcheng
Origin	Changzhou
HS Code	8419399
Production Capacity	10set/Year

Product Description

China Spray DryerDescription:
Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as: solution, emulsion, suspension and pumpable paste states ,For this reason, when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.

Work Principle:
High Speed Centrifugal Spray Dryer Series of LPG is gas-liquid co-current flow drying equipment, using high-speed centrifugal atomizer, the liquid will be atomized into fine droplets, then mix with the hot air from the distributor in the dryer, heat and mass transfer exchanges rapidly during the mixing process. In a very short period of time the liquid become dry powdered products. Production control and product quality control is convenient and reliable. It is widely used in the drying production of different types of liquids materials.

Product Characteristics:
1.Different types of solution, suspension, emulsion and cream paste material can be dry for a one-time production.2.The fog moment and fog droplet of spray-drying can be slightly adjusted.3.The hot air has been reasonable allocation, and the ceiling and walls sticky situation has been eliminated.4.It is suitable for the drying of thermo-sensitive and non thermo-sensitive material at the same time. The product particles are smaller than pressure spray dryer.5.Simplify the production process, easy to use, good liquidity and instant of the product.

Material to be dried:
1.Inorganic: aluminum nitride, zirconia, potassium fluoride, bentonite, kaolin, barium sulfate, lead sulfate, sodium aluminum, chromium oxide, titanium dioxide.2.Macromolecule polymers: urea-formaldehyde resin, PVC.3.Dyes: dispersol red FB, reactive dyes, etc.4.Chemical Agents: silica dioxide, diatomite, sodium silicate, wood calcium, sodium ligninsulfonate, naphthalene series water reducer.5.Pesticide: carbendazol chloride wettable power.6.Food and feed additives: casein peptide phosphate, potassium sorbate, fish serum.7.Fertilizer: potassium humate, sodium humate.

Technical Parameter:

Model	Max water evaporation(kg/h)	Inlet Air tem(ºC)	Outlet air tem(ºC)	Transmission Model for atomizer	Rotate speed(rpm)	Spray disk diameter (mm)	Dimension(L ×W× H) (m)
LPG5	5	140-350(auto control)	80-90	Compress Air	25000	50	1.8×0.9×2.2
LPG25	25			Mechanical	18000	120	3×2.7×4.3
LPG50	50				18000	120	3.3×3.2×5.1
LPG100	100				18000	120	4.6×4.2×7
LPG150	150				15000	150	5.5×4.5×7
LPG200-2000	200-2000				8000-15000	180-340	According to condition
Note: There is relationship between the water evaporation, material characteristics and inlet air temperature

Pictures: