Spray Dryer for Blood, Milk Powder, Starch, Herbal, Herb Extract, Milk, Stevia, Spirulina, Protein, Coffee, Egg

Basic Info

Model NO.	PLG-5
Inlet Air Temperature	140~350ºC
Outlet Air Temperature	80~90ºC
Recycle Rate of Dry Powder	95%
Operational Method	Continuous
Drying Medium	Air
Structure	Spraying Dryer
Transport Package	Wooden Package
Specification	3400*1600*2700
Trademark	JXX
Origin	China
HS Code	84339090
Production Capacity	20sets/Month

Product Description

Company introduction :Jiangsu Xingxing Drying Equipment
DESCRIPTION
Spray drying is a most widely used craft in liquid molding process and drying industry. It is ideal for producing powdery and granular solid product from the solution, emulsions, soliquoid and pumpable paste states. Thus, when the particle size distribution, residual moisture content, bulk density and particle shape must meet a precision standard, the spray drying is an ideal choice.

WORKING PRINCIPLE
Filtered and heated air goes into air distributor on the top of the dryer, and spirals into drying room uniformly. Going through the high-speed centrifugal atomizer on the top of tower, the liquid (rotates) sprays into extremely fine mist liquid beads, and can be dried completely in a short time in co-current contact with hot air. Finished products exhaust continuously from the bottom of the drying tower and cyclone separator, while waste gases are vented by the fan.

FEATURES
1. Fast drying speed; greatly increasing the surface area of the material after the liquid is atomized; it can instantly evaporate 95% -98% of water in the stream of hot air; it takes only a few seconds to complete drying, which is especially suitable for drying heat sensitive materials.
2. Our products have a good uniformity, mobility and solubility, high purity and good quality.
3. Simplified production process, easy to operate and control. Liquid of 40-60% moisture content (up to 90% for special materials) can be dried into powder products at a time, without crushing and screening after drying, which reduces production process and improve product purity. the size, bulk density, moisture can be adjusted within a certain range by changing operation conditions. It is convenient to do control and management.

APPLICATION
Chemical industry: sodium fluoride (potassium), alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formaldehyde silicic acid, catalyst, sulphuric acid agent, amino acid, white carbon black, etc.
Plastic resin: AB, ABS latex, urea resin, phenolic resin, dense glue (urea) formaldehyde resins, polyethylene, polyvinyl chloride, etc.
Food industry: fat-rich milk powder, lancet protein, cocoa milk powder, babymeal, hunting blood meal, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, seasoning meat, protein, soybean, peanut protein, hydrolyzate and so on.
Sugar: corn syrup, corn starch, glucose, pectin, malt sugar, potassium sorbate, etc.
Ceramics: aluminium oxide, ceramic tile material, magnesium oxide, talcum powder, etc.

Technical Parameter of Centrifugal Spray Dryer

Item/Model	LPG
	5	25	50		100	150		200-2000
Inlet Temperature (ºC)		≤ 350
Outlet Temperature (ºC)		80 to 90
Maximum Moisture Evaporation (kg/h)*	5	25	50		100		150	200-2000
Drive type of Centrifugal Spray Nozzle	Compressed air drive	Mechanical drive
Rotating Speed	25000	22000		21500	18000	18000		15000
Diameter of Spray Disk (mm)	50	102		108	108	150		180-340
Heat Source	Electricity	Electricity		Electricity+ steam, fuel oil, gas	Electricity+ steam	Electricity+ steam, fuel oil, gas		Depending on users
Maximum Power of Electric Heating (kw)	8	31.5		60	81	99
Overall Dimensions (L × W × H)	1.8 × 0.93 × 2.2	3 × 2.7 × 4.26		3.7 × 3.2 × 5.1	4.6 × 4.2 × 6	5.5 × 4.5 × 7		According to the actual situation
Dry Powder Recovery (%)	≥ 95	≥ 95		≥ 95	≥ 95	≥ 95		≥ 95

Company ShowCompany introduction: Jiangsu Xingxing Drying EquipmentJiangsu Xingxing Drying Equipment has established in 1998 and it covers an area of 15000 square meters, possesses fixed asset of USD 7 million. The products have exported to US, Singapore, India, Ukraine, Russia, Korea and so on. The company have advanced production equipment , excellent technical team and after-sales service.CERTIFICATEPackage:wooden caseService:pre-sale serviceWe Invite customers to visit our company and communicate on technical requirements face to face.sale serviceResponsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.after-sale serviceWe provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.quality promiseOur company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.Equipment warranty period is one year,all the parts for the equipment choose well-known brand.During the warranty when equipment have problem in quality like equipment failure and damage,the company for free maintenance or replacement.We look forward to cooperating with partners from all over the world to build win-win cooperation relationship in long term. Welcome for your visiting.Previous ExhibitionFAQ:1.
Q: Please describe your warranty period. A: 15 months after the equipment is arrived at the destination port or 12 months after the installation and commissioning of the equipment, whichever comes first.2.
Q: Do you provide on-site installation and commissioning? A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.3.
Q: How about the cost of on-site installation and commissioning guidance? A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.4.
Q: Are you a factory or a trading company? A: We are a professional manufacturer. We have own factory and pilot plant for customers to do sample testing.